Alcatel-Lucent 7705 Configuration Manual page 440

Configuring Route Policy Components
The following example displays entry command usage. These commands are configured in
the config>router>policy-options context.
Example:
The following example displays entry parameters and includes the default action parameters
that were displayed in the previous section.
A:ALU-B>config>router>policy-options# info
----------------------------------------------
440
config>router>policy-options# policy-statement "1"
policy-statement# entry 1
policy-statement>entry$ to
policy-statement>entry>to# protocol bgp
policy-statement>entry>to# neighbor 10.10.10.104
policy-statement>entry>to# exit
policy-statement>entry# action accept
policy-statement>entry>action# exit
policy-statement>entry# exit
policy-statement# entry 2
policy-statement>entry$ from
policy-statement>entry>from# protocol ospf
policy-statement>entry>from# exit
policy-statement>entry$ to
policy-statement>entry>to# protocol ospf
policy-statement>entry>to# neighbor 10.10.0.91
policy-statement>entry>to# exit
policy-statement>entry# action accept
policy-statement>entry>action# exit
policy-statement "1"
entry 1
to
protocol bgp
neighbor 10.10.10.104
exit
action accept
exit
exit
entry 2
from
protocol ospf
exit
type type
to
level {1 | 2}
neighbor {ip-address | prefix-list
name}
prefix-list name [name...(up to 5
max)]
protocol protocol [all | instance
instance]
7705 SAR OS Router Configuration Guide