Alcatel-Lucent 7705 Configuration Manual page 119

The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is reattempted.
The port name consists of the port-id (for T1/E1 interfaces and Ethernet interfaces) and an optional
encapsulation value (for Ethernet interfaces). The port name can also be the bundle-id used for the
multilink bundle (PPP or IMA). Refer to the 7705 SAR OS Interface Configuration Guide for
information on configuring ports.
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
Default no port
Parameters
port-name — the physical port identifier, in the form port-id[:encap-val]
port-id — the physical port identifier
proxy-arp-policy
Syntax proxy-arp-policy policy-name [policy-name...(up to 5 max)]
no proxy-arp-policy
Context config>router>interface
Description This command enables proxy ARP on the interface and specifies an existing policy statement that
controls the flow of routing information by analyzing match and action criteria. The policy statement
is configured in the config>router>policy-options context (see
Policy Command Reference
requests on behalf of another device.
Default no proxy-arp-policy
7705 SAR OS Router Configuration Guide
Values encap-val
Values slot/mda/port[.channel]
bundle-id
aps-id
mw-link-id
section). When proxy ARP is enabled, the 7705 SAR responds to ARP
0 (for null)
0 to 4094 (for dot1q)
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 to 32
aps-group-id[.channel]
aps keyword
group-id 1 to 24
mw-link-link-num
link-num 1 to 24
IP Router Configuration
Route Policy Options in the Route
119