Alcatel-Lucent 7705 Configuration Manual page 369

dst-port
Syntax dst-port {lt | gt | eq} tcp/udp port
dst-port range start end
no dst-port
Context config>security>policy>entry>match
Description This command configures a destination protocol TCP or UDP port number or port range for the match
criteria.
The no form of the command removes the destination port match criteria.
Default
no dst-port
Parameters lt | gt | eq — use relative to tcp/udp port for specifying the port number match criteria:
tcp/udp port — the destination port number to be used as a match criteria, expressed as a decimal
start end — specifies an inclusive range of port numbers to be used as a match criteria. The
icmp-code
Syntax icmp-code icmp-code
no icmp-code
Context config>security>policy>entry>match
Description This command configures matching on an ICMP code field in the ICMP header of an IPv4 packet as
a match criterion.
This option is only meaningful if the protocol match criterion specifies ICMP (1).
The no form of the command removes the criterion from the match entry.
Default no icmp-code
7705 SAR OS Router Configuration Guide
lt specifies that all port numbers less than tcp/udp port number match
gt specifies that all port numbers greater than tcp/udp port number match
eq specifies that tcp/udp port number must be an exact match
integer
Values 1 to 65535
destination port numbers start and end are expressed as decimal integers.
Values
1 to 65535
Filter Policies
369