The number and seconds parameters represent how many of each of these types of
ICMPv6 errors the node will generate in the specified interval on the specified interface.
Example:
Configuring a DHCP Relay Agent
Use the following CLI syntax to configure the router as a DHCP Relay agent:
CLI Syntax:
Example:
7705 SAR OS Router Configuration Guide
config>router>if>ipv6# icmp6
config>router>if>ipv6>icmp6# packet-too-big 100 20
config>router>if>ipv6>icmp6# param-problem 100 20
config>router>if>ipv6>icmp6# time-exceeded 100 20
config>router>if>ipv6>icmp6# unreachables 100 20
config>router
interface ip-int-name
dhcp
description description-string
option
server server1 [server2...(up to 8 max)]
no shutdown
no shutdown
A:ALU-41>config>router# interface "DHCP_interface"
A:ALU-41>config>router>if$ dhcp option
A:ALU-41>config>router>if>dhcp>option$ circuit-id
ascii-tuple
A:ALU-41>config>router>if>dhcp>option$ exit
IP Router Configuration
action {replace | drop | keep}
circuit-id [ascii-tuple | port-id |
if-name]
copy-82
remote-id [mac | string string]
71