Alcatel-Lucent 7705 Configuration Manual page 203

interface
Syntax interface [ip-int-name | ip-addr] [icmp]
interface spoke-name statistics
Context clear>router
Description This command clears IP interface statistics.
If no IP interface is specified either by IP interface name or IP address, the command will perform the
clear operation on all IP interfaces.
Parameters ip-int-name | ip-addr — the IP interface name or IP interface address
icmp — specifies to reset the ICMP statistics for the IP interface(s) used for ICMP rate limiting
spoke-name — the spoke SDP interface name
neighbor
Syntax neighbor [all | ip-address]
neighbor [interface ip-int-name | ip-address]
Context clear>router
Description This command clears IPv6 neighbor information.
If an IP address or interface name is specified, information is cleared only for that interface.
Parameters all — all IPv6 neighbors
ip-address — an IPv6 neighbor address
ip-int-name — an IPv6 neighbor interface name, 32 characters maximum
router-advertisement
Syntax router-advertisement all
router-advertisement [interface interface-name]
Context clear>router
Description
This command clears router advertisement counters.
7705 SAR OS Router Configuration Guide
Default all IP interfaces
Values IPv6 address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
IP Router Configuration
203