Alcatel-Lucent 7705 Configuration Manual page 377

7705 SAR OS Router Configuration Guide
Table 48: Show Filter Output Fields (Filter ID Specified) (Continued)
Label
Protocol
Next Header
ICMP Type
Fragment: (IPv4 filters
only)
IP-Option
TCP-syn
Match action
Ing. Matches
Src. Port
Dest. Port
Dscp
ICMP Code
Option-present: (IPv4
filters only)
Multiple Option: (IPv4
filters only)
Description
The protocol ID for the match criteria. Undefined indicates no protocol
specified. (IPv4 filters only)
The next header ID for the match criteria. Undefined indicates no next
header is specified. (IPv6 filters only)
The ICMP type match criterion. Undefined indicates no ICMP type is
specified.
Off — configures a match on all unfragmented packets
On — configures a match on all fragmented packets
Specifies matching packets with a specific IP option or range of IP
options in the IP header for IP filter match criteria (IPv4 filters only)
Off — the SYN bit is disabled
On — the SYN bit is set
Default — the filter does not have an explicit forward or drop match
action specified. If the filter entry ID indicates that the entry is Inactive,
the filter entry is incomplete as no action was specified.
Drop — drop packets matching the filter entry
Forward — forward packets matching the filter entry
The number of ingress filter matches/hits for the filter entry
The source TCP or UDP port number or port range
The destination TCP or UDP port number or port range
The DSCP name
The ICMP code field in the ICMP header of an IP packet
Off — does not search for packets that contain the option field or have
an option field of zero
On — matches packets that contain the option field or have an option
field of zero
Off — the option fields are not checked
On — packets containing one or more option fields in the IP header will
be used as IP filter match criteria
Filter Policies
377