Configuring Interfaces; Configuring A System Interface - Alcatel-Lucent 7705 Configuration Manual

Common Configuration Tasks
The following example displays the system name output.
A:ALU-A>config>system# info
#------------------------------------------
# System Configuration
#------------------------------------------
----------------------------------------------

Configuring Interfaces

The following command sequences create a system interface and a logical IP interface. The
system interface assigns an IP address to the interface, and then associates the IP interface
with a physical port. The logical interface can associate attributes like an IP address or port.
The system interface cannot be deleted.

Configuring a System Interface

Use the following CLI syntax to configure a system interface:
CLI Syntax:
Example:
62
name "ALU-A"
location "Kanata, ON, Canada"
snmp
exit
. . .
exit
config>router
interface ip-int-name
address {ip-addr/mask-length}|
config>router# interface system
config>router>if# address 10.10.10.104/32
config>router>if# exit
{ip-addr/netmask}
7705 SAR OS Router Configuration Guide