Table 33 Show Standard Route Table Output Fields - Alcatel-Lucent 7705 Configuration Manual

IP Router Command Reference
rtr-advertisement
Syntax rtr-advertisement [interface interface-name] [prefix ipv6-prefix/prefix-length] [conflicts]
Context show>router
Description This command displays router advertisement information. If no parameters are specified, all routes are
displayed, sorted by prefix.
Parameters
interface-name — the interface name
ipv6-prefix/prefix-length — displays only those routes matching the specified IP prefix and prefix
conflicts — displays router advertisement conflicts
Output
The following output is an example of router advertisement information, and
fields.
190
Table 33: Show Standard Route Table Output Fields
Label
Dest Prefix
Next Hop
Type
Proto
Age
Metric
Pref
No. of Routes
Values 32 characters maximum
length
Values ipv6-prefix
prefix-length
Description
The route destination address and mask
The next hop IP address for the route destination
Local — the route is a local route
Remote — the route is a remote route
The protocol through which the route was learned
The route age in seconds for the route
The route metric value for the route
The route preference value for the route
The number of routes displayed in the list
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
0 to 128
7705 SAR OS Router Configuration Guide
Table 34 describes the