Alcatel-Lucent 7705 Configuration Manual page 350

Filter Command Reference
mask — the subnet mask length expressed as a decimal integer
netmask — any mask expressed in dotted-decimal notation
dst-ip
Syntax dst-ip ipv6-address/prefix-length
no dst-ip
Context config>filter>ipv6-filter>entry>match
Description
This command configures a destination IPv6 address range to be used as an IP filter match criterion.
To match on the destination IP address, specify the address and prefix length; for example, 11::12/128.
The no form of the command removes the destination IP address match criterion.
Default
n/a
Parameters ipv6-address/prefix-length — the IPv6 address on the interface
dst-mac
Syntax dst-mac ieee-address
no dst-mac
Context config>filter>mac-filter>entry>match
Description This command configures a destination MAC address to be used as a MAC filter match criterion.
To match on the destination MAC address, specify the IEEE address.
The no form of the command removes the destination MAC address match criterion.
Default no dst-mac
Parameters
ieee-address — the MAC address to be used as a match criterion
350
Values 0 to 32
Values 0.0.0.0 to 255.255.255.255
Values ipv6-address
prefix-length
Values xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx, where x is a
hexadecimal digit
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
0 to 128
7705 SAR OS Router Configuration Guide