Configuring Icmp And Icmpv6 - Alcatel-Lucent 7705 Configuration Manual

Common Configuration Tasks
The following displays an autonomous system configuration example:
A;ALU-B>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
#------------------------------------------
A:ALU-B>config>router#

Configuring ICMP and ICMPv6

Use the following CLI syntax to configure ICMP for the router:
CLI Syntax:
The number and seconds parameters represent how many of each of these types of ICMP
errors the node will generate in the specified interval on the specified interface.
Example:
Use the following CLI syntax to configure ICMPv6 for the router:
CLI Syntax:
70
interface "system"
address 10.10.10.103/32
exit
interface "to-104"
address 10.0.0.103/24
port 1/1/1
exit
exit
autonomous-system 100
router-id 10.10.10.103
config>router
interface ip-int-name
config>router>if# icmp
config>router>if>icmp# mask-reply
config>router>if>icmp# ttl-expired 100 20
config>router>if>icmp# unreachables 100 20
config>router
interface ip-int-name
icmp
mask-reply
ttl-expired number seconds
unreachables number seconds
ipv6
icmp6
packet-too-big number seconds
param-problem number seconds
time-exceeded number seconds
unreachables number seconds
7705 SAR OS Router Configuration Guide