Filter Command Reference
Show Commands
ip
Syntax
ip [ip-filter-id |ipv6-filter-id] [entry entry-id] [association | counters]
Context
show>filter
Description
This command displays IPv4 and IPv6 filter information.
Parameters
ip-filter-id | ipv6-filter-id — displays detailed information for the specified filter ID and its filter
entry-id — displays information on the specified filter entry ID for the specified filter ID only
association — appends information as to where the filter policy ID is applied to the detailed filter
counters — displays counter information for the specified filter ID
Output
The following outputs are examples of IP filter information:
Sample Output
*A-ALU-1# show filter ip
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope
-------------------------------------------------------------------------------
1
3
6
10
11
-------------------------------------------------------------------------------
Num IP filters: 5
===============================================================================
*A-ALU-1#
374
entries
Values
1 to 65535
Values
1 to 64
policy ID output
•
IP filter information
•
IP filter information with filter ID specified
•
IP filter associations
•
IP filter counters
(Sample
Applied Description
Template Yes
Template Yes
Template Yes
Template No
Template No
(Sample
Output,
Table
47)
(Sample
(Sample
Output,
Table
49)
Output,
Table
50)
7705 SAR OS Router Configuration Guide
Output,
Table
48)