Table 32 Show Ipv6 Neighbor Output Fields - Alcatel-Lucent 7705 Configuration Manual

IP Router Command Reference
route-table
Syntax route-table [family] [ip-prefix[/prefix-length] [longer | exact]] | [protocol protocol-name] |
[summary]
Context show>router
Description
This command displays the active routes in the routing table.
If no command line arguments are specified, all routes are displayed, sorted by prefix.
The following adapter cards support the full IPv6 subnet range for IPv6 static routes:
For these cards, the supported route range for statically provisioned or dynamically learned routes is
from /1 to /128.
For all other cards, modules, and ports (including the v-port on the 2-port 10GigE (Ethernet) module),
the supported range for statically provisioned or dynamically learned routes is from /1 to /64 or is /128
(indicating a host route).
Parameters family — specifies the type of routing information to be distributed by this peer group
188
Table 32: Show IPv6 Neighbor Output Fields
Label
IPv6 Address
Interface
MAC Address
State
Expiry
Type
RTR
• 6-port Ethernet 10Gbps Adapter card
• 8-port Gigabit Ethernet Adapter card, version 2 and version 3
• 2-port 10GigE (Ethernet) Adapter card (on the v-port)
• 10-port 1GigE/1-port 10GigE X-Adapter card
Values
ipv4 — displays the routes that have the IPv4 family enabled,
excluding IP-VPN routes
ipv6 — displays the routes that are IPv6-capable, including IPv6
static routes
Description
The IPv6 address
The name of the IPv6 interface
The link-layer address
The current administrative state
The amount of time before the entry expires
The type of IPv6 interface
Specifies whether the neighbor is a router
7705 SAR OS Router Configuration Guide