IP Router Command Reference
Parameters
ip-int-name — only debugs the specified IP interface
ip-address — only debugs the specified IPv4 or IPv6 address
neighbor
Syntax
[no] neighbor
Context
debug>router>ip
Description
This command enables or disables neighbor debugging.
packet
Syntax
packet [ip-int-name | ip-address] [headers] [protocol-id]
no packet [ip-int-name | ip-address]
Context
debug>router>ip
Description
This command enables or disables debugging for IP packets.
Parameters
ip-int-name — only debugs the specified IP interface
ip-address — only debugs the specified IPv4 or IPv6 address
headers — only debugs the packet header
208
Values
32 characters maximum
Values
ipv4-address
ipv6-address
Values
32 characters maximum
Values
ipv4-address
ipv6-address
a.b.c.d
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
a.b.c.d
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
7705 SAR OS Router Configuration Guide