Nat Pool - Alcatel-Lucent 7705 Configuration Manual

Filter Command Reference

nat pool

Syntax nat pool [pool-id |pool-name] [detail]
Context show>security>zone
Description This command displays NAT pool information.
Parameters pool-id — displays detailed information for the specified zone pool ID
pool-name — displays information for the specified zone pool name
detail — displays detailed information on the specified pool ID
Output The following output is an example of zone pool information:
Sample Output
*A-ALU-1# show security zone 1 nat pool 1 detail
===============================================================================
Security Zone
===============================================================================
Zone Id
Name
===============================================================================
===============================================================================
NAT Pool
===============================================================================
Pool Id
Type
Name
Description
-------------------------------------------------------------------------------
Entry Id
IP Address
-------------------------------------------------------------------------------
Num of Entries
===============================================================================
*A-ALU-1#
policy
Syntax policy [entry entry-id] [detail] [statistics]
Context show>security>zone
Description This command displays NAT policy information.
400
Values 1 to 100
Values 1 to 32 characters (must start with a letter)
: 1
: Service Inbound Zone
: 1
: source-nat
: (Not Specified)
: Pool 1:
: 1
: ies-10010.30.10.1
: 1
State
Direction
Direction
Port
7705 SAR OS Router Configuration Guide
: Committed
: Inbound
: Inbound
: Any