Common Configuration Tasks - Alcatel-Lucent 7705 Configuration Manual

Common Configuration Tasks

Common Configuration Tasks
This section provides a brief overview of the tasks that must be performed to configure VRRP
and list the CLI commands.
VRRP parameters are defined under a service interface context. An IP address must be
assigned to each IP interface. Only one primary IP address can be associated with an IP
interface but several secondary IP addresses can be associated.
Owner and non-owner configurations must include the following parameters:
Other owner and non-owner configurations include the following optional commands:
In addition to the common parameters, the following non-owner commands can be
configured:
234
• all participating routers in a VRRP instance must be configured with the same VRID
• all participating non-owner routers can specify up to eight backup IP addresses (IP
addresses the master is representing). The owner configuration must include at least
one backup IP address.
• authentication-key
• MAC
• message-interval
• master-int-inherit
• priority
• policy
• ping-reply
• preempt
• telnet-reply
• ssh-reply
• [no] shutdown
7705 SAR OS Router Configuration Guide