Common Configuration Tasks
VLAN Filter Entry
Within a VLAN filter policy, configure filter entries that contain criteria against which
ingress traffic on a ring port is matched. The action specified in the entry determines how the
packets are handled, either dropped or forwarded. Forwarded packets are sent to the other ring
port or the v-port, depending on the destination.
Use the following CLI syntax to configure a VLAN filter entry:
CLI Syntax:
Example:
The following example displays a VLAN filter entry configuration.
A:sim1>config>filter# info
----------------------------------------------
----------------------------------------------
A:sim1>config>filter#
304
•
Enter a filter entry ID. The system does not dynamically assign a value.
•
Assign an action, either drop or forward.
•
Specify matching criteria (see
configure>filter>vlan-filter filter-id
entry entry-id [create]
configure>filter>vlan-filter 2
configure>filter>vlan-filter# entry 2 create
configure>filter>vlan-filter>entry# description "drop-
104"
configure>filter>vlan-filter>entry# action drop
configure>filter>vlan-filter>entry# exit
vlan-filter 2 create
entry 2 create
description "drop-104"
match
action drop
exit
exit
exit
VLAN Entry Matching
description description-string
action {drop | forward}
exit
7705 SAR OS Router Configuration Guide
Criteria).