Table 36 Show Static Route Table Output Fields - Alcatel-Lucent 7705 Configuration Manual

ip-address — only displays static routes with the specified next hop IP address
tag — displays the 32-bit integer tag added to the static route. The tag is used in route policies to
detail — displays detailed static route information
Output The following output is an example of static route information, and
Sample Output
*A:ALU-1# show router static-route
===============================================================================
Static Route Table (Router: Base)
===============================================================================
Prefix
-------------------------------------------------------------------------------
192.168.250.0/24
192.168.252.0/24
192.168.253.0/24
===============================================================================
*A:ALU-A#
7705 SAR OS Router Configuration Guide
preference — only displays static routes with the specified route preference
Values 0 to 65535
Values ipv4-address
Values ipv6-address
control distribution of the route into other protocols.
Values 1 to 4294967295
Next Hop
10.200.10.1
10.10.0.254
to-ser1
Table 36: Show Static Route Table Output Fields
Label
Prefix
Tag
Met
Pref
Type
a.b.c.d (host bits must be 0)
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
Family: IPv4
Description
The static route destination address
The 32-bit integer tag added to the static route
The route metric value for the static route
The route preference value for the static route
NH — The route is a static route with a directly connected next hop. The
next hop for this type of route is either the next-hop IP address or an
egress IP interface name.
IP Router Configuration
Table 36 describes the fields.
Tag Met Pref Type Act
Interface
1 5
to-ser1
1 5
n/a
1 5
n/a
NH Y
NH N
NH N
195