Adding Table Rows; Assigning Rows From Other Tables - AudioCodes Mediant 500L User Manual

User's Manual
Item # Button
5 -
6 -
7 -
8
6.1.6.1

Adding Table Rows

The following procedure describes how to add table rows. Before adding rows, the
following GUI conventions are used:

Commonly required parameters are displayed in bold font.

If you change the value of a parameter (before clicking Apply), the parameter's field is
highlighted, as shown in the example below:

For indications of invalid values, see ''Invalid Value Indications'' on page 60.

To add a row:
1. Click the New
2. Configure the parameters of the row as desired. For information on configuring
parameters that are assigned a value which is a row referenced from another table,
see ''Assigning Rows from Other Tables'' on page 57.
3. Click Apply to add the row to the table or click Cancel to ignore your configuration.
4. If the Save
settings to flash memory, otherwise they are discarded if the device resets (without a
save to flash) or powers off.
6.1.6.2

Assigning Rows from Other Tables

Some tables contain parameters whose value is an assigned row (referenced-row) from
another table (referenced-table). For example, the IP Groups table contains the 'Proxy Set'
parameter whose value is an assigned Proxy Set, configured in the Proxy Sets table.
These parameter types provide a drop-down list for selecting the value and a View button,
as shown in the example below:
You can assign a referenced-row using one of the following methods:

Selecting a referenced-row from the drop-down list:
•
Scroll down to the desired item and click it.
Version 7.2
Link to open the "child" table of the "parent" table. A link appears only
if the table has a "child" table. The "child" table is opened for the
selected row.
Navigation bar for scrolling through the table's pages (see ''Viewing
Table Rows'' on page 62).
Search tool for searching parameters and values (see ''Searching
Table Entries'' on page 64).
Modifies the selected row (see ''Modifying Table Rows'' on page 59).
button, located on the table's toolbar; a dialog box appears.
button is surrounded by a red border, you must save your
Figure 6-6: Parameter with View Button (Example)
57 Mediant 500L Gateway & E-SBC
6. Web-Based Management