Supported Sas/Sata Drive Backplane Configurations - Lenovo System x3750 M4 Installation And Service Manual

In the following illustration, you have a combination of drive backplanes. This example shows a 2.5-inch
drive backplane and a 1.8-inch drive backplane installed in the server. In this instance, the drive bay IDs will
require a gap in the bay ID numbering between the drive IDs in the 2.5-inch and 1.8-inch drive backplanes.
0 1 2 3 8 9 10

Supported SAS/SATA drive backplane configurations

This section provides information pertaining to SAS/SATA drive backplane configurations.
The following illustrations show the hot-swap drive backplanes that the server supports
4x2.5-inch drive backplane rear view:
Configuration
SAS signal
connector
connector
SAS power
connector
11 12 13 14 15
Empty Empty
.
Chapter 2 Installing optional devices
57