Lenovo System x3750 M4 Installation And Service Manual page 89

Table 17. Supported RAID cache cards and where you can install the cache cards. (continued)
RAID cache card
ServeRAID M5200 Series 1
GB Cache/RAID 5 Upgrade for
System x (RAID cache card)
ServeRAID M5200 Series 1
GB Flash/RAID 5 Upgrade for
System x (RAID cache card)
ServeRAID M5200 Series 2
GB Flash/RAID 5 Upgrade for
System x (RAID cache card)
ServeRAID M5200 Series 4
GB Flash/RAID 5 Upgrade for
System x (RAID cache card)
Where to install the
card Notes
• Provides RAID levels 5 and 50 upgrade support.
• Enables the ServeRAID controller to run MegaRAID
• Has 72-bit memory.
You can install this • Enables the ServeRAID controller to run MegaRAID
cache card in the
RAID cache card
• Provides RAID levels 5 and 50 upgrade support.
connector on the
• Has 40-bit memory.
system board or the
ServeRAID M5210
SAS/SATA Controller.
You can install this • This cache card comes with a flash power module
cache card in the
RAID cache card
connector on the
system board or the
ServeRAID M5210
SAS/SATA Controller.
• Enables the ServeRAID controller to run MegaRAID
• Provides RAID levels 5 and 50 upgrade support.
• Has 72-bit memory.
You can install this • This cache card comes with a flash power module
cache card in the
RAID cache card
connector on the
system board or the
ServeRAID M5210
SAS/SATA Controller.
• Enables the ServeRAID controller to run MegaRAID
• Provides RAID levels 5 and 50 upgrade support.
• Has 72-bit memory.
You can install this • This cache card comes with a flash power module
cache card in the
RAID cache card
connector on the
system board or the
ServeRAID M5210
SAS/SATA Controller.
• Enables the ServeRAID controller to run MegaRAID
• Provides RAID levels 5 and 50 upgrade support.
• Has 72-bit memory.
firmware.
firmware.
(Supercap pack) that you can attach to this card. It
powers the integrated RAID subsystem long enough to
store the cache contents to flash in the event of a power
loss. The flash power module must be installed remotely
in the server, (see "Installing a RAID adapter flash power
module" on page 89) for information about where to install
the flash power module in the server).
firmware.
(Supercap pack) that you can attach to this card. It
powers the integrated RAID subsystem long enough to
store the cache contents to flash in the event of a power
loss. The flash power module must be installed remotely
in the server, (see "Installing a RAID adapter flash power
module" on page 89) for information about where to install
the flash power module in the server).
firmware.
(Supercap pack) that you can attach to this card. It
powers the integrated RAID subsystem long enough to
store the cache contents to flash in the event of a power
loss. The flash power module must be installed remotely
in the server, (see "Installing a RAID adapter flash power
module" on page 89) for information about where to install
the flash power module in the server).
firmware.
Chapter 2
.
Installing optional devices
75