Lenovo System x3750 M4 Installation And Service Manual page 273

Broadcom NetXtremeII
ML2 Dual-port 10 Gb
SFP+ Ethernet adapter
Port 1
Port 2
Broadcom NetXtremeII
ML2 Dual-port 10 Gb-T
Ethernet adapter
Port 1
Port 2
Link LED
Activity LED
Link LED
Activity LED
To install the ML2 Dual-port 10Gbase-T Adapter for IBM System x or ML2 Dual-port 10 GbE SFP+ Adapter
for IBM System x, complete the following steps:
Note: The illustration in this document might differ slightly from your hardware.
Step 1. Read the safety information and installation guidelines, see "Safety" on page v and "Installation
guidelines" on page 38.
Step 2. Touch the static-protective package that contains the new adapter to any unpainted metal surface
on the server; then, remove the adapter from the package.
Step 3. Align the edge connector on the adapter with the connector on the system board. Press the edge
of the connector firmly into the system board connector and make sure that the adapter snaps
into the connector securely.
Link LED
Activity LED
Link LED
Activity LED
.
Chapter 6 Removing and replacing components
259