Table of Contents
Advertisement
Figure 32. Connecting cables to the NVMe switch cards
Then, close the retainers to secure the adapters.
SAS/SATA backplane combinations
Follow the instructions in this section to learn how do cable routing for combinations with SAS/SATA
backplanes.
See the following sections for cable routing combinations with only SAS/SATA drive backplanes.
•
"One backplane" on page 56
•
"Two backplanes" on page 59
•
"Three backplanes" on page 60
•
"Four backplanes" on page 62
•
"Six backplanes" on page 64
.
Chapter 3
Internal cable routing
55
Advertisement
Table of Contents
