Lenovo System x3750 M4 Installation And Service Manual page 635

This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
• 806f0008-0a01xxxx : [PowerSupplyElementName] has been added to container
[PhysicalPackageElementName].
IMM has detected a Power Supply has been added.
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0084
User Response
Power Supply 1: Information only; no action is required.
• 806f0008-0a02xxxx : [PowerSupplyElementName] has been added to container
[PhysicalPackageElementName].
IMM has detected a Power Supply has been added.
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0084
User Response
Power Supply 2: Information only; no action is required.
• 806f0009-1381xxxx : [PowerSupplyElementName] has been turned off.
IMM has detected that the system power has been turned off.
Severity
Appendix D. Integrated management module II (IMM2) error messages
621