Removing A Memory Module - Lenovo System x3750 M4 Installation And Service Manual

(Optional)
CD/DVD
drive
connector
Optical
drive
cable
Step 5. Slide the CD/DVD back into the server.
Step 6. Reinstall the fan cage assembly (see "Replacing the fan cage assembly" on page 253).
Step 7. Replace the cover (see "Replacing the server top cover" on page 216).
Step 8. Slide the server into the rack.
Step 9. Reconnect the power cord and any cables that you removed.
Step 10. Turn on the peripheral devices and the server.

Removing a memory module

Use this information to remove a memory module.
To remove a dual inline memory module (DIMM), complete the following steps:
Step 1. Read the safety information and installation guidelines, see "Safety" on page v and "Installation
guidelines" on page 38.
Step 2. Turn off the server (see "Turning off the server" on page 23) and all attached peripheral devices.
Disconnect all power cords; then, disconnect all external cables as necessary to replace the device.
Step 3. Remove the top cover (see "Removing the server top cover" on page 216).
232
Lenovo System x3750 M4 Installation and Service Guide