Lenovo System x3750 M4 Installation And Service Manual page 810

This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
• 81030112-0601xxxx : Sensor [SensorElementName] has deasserted.
This message is for the use case when system firmware has exited maintenance mode.
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0509
User Response
Information only; no action is required.
• 81070101-0b09xxxx : Sensor [SensorElementName] has deasserted the transition from normal
to non-critical state.
Temperature of ML2 Card has been back to normal from non-critical state
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Warning - Temperature
SNMP Trap ID
12
CIM Information
Prefix: PLAT ID: 0521
User Response
Information only; no action is required.
• 8107010f-2201xxxx : Sensor [SensorElementName] has deasserted the transition from normal
to non-critical state.
This message is for the use case when an implementation has detected that a Sensor has deasserted a
transition to non-critical from normal.
796
Lenovo System x3750 M4 Installation and Service Guide