Lenovo System x3750 M4 Installation And Service Manual page 154

• Disk GPT Recovery
Select this choice to choose the Disk GPT Recovery method. If Automatic is selected the
UEFI attempts to repair the corrupted GUID Partition Table (GPT) by copying over the corrupted
version with a non-corrupt version.
– Storage
Select this choice to view and manage RAID controller configurations.
– Configuration Management
Select this choice to display configuration options. Some options only appear if the controller
supports that option.
– Controller Management
Select this choice to display the controller status and basic properties of the controller. For example
product name, serial number, and firmware version.
– Virtual Drive Management
Select this choice to manage and view basic virtual drive properties.
– Drive Management
Select this choice to display basic drive properties and perform operational tasks. For example
assign and unassign a hot spare drive, locate drives, and place a drive online or offline.
– Hardware Components
Select this choice to display the status of the battery, temperature sensors, fans, and power supplies.
– Network
Select this choice to view or configure the network device options, such as iSCSI, PXE, and network
devices. There might be additional configuration choices for optional network devices that are
compliant with UEFI 2.1 and later.
– Network Boot Configuration
Select this choice to configure the network boot parameters.
– iSCSI Configuration
Select this choice to configure the iSCSI parameters.
– Driver Health
Select this choice to view the health of the controllers in the server as reported by their device drivers.
• Date and Time
Select this choice to set the date and time in the server, in 24-hour format (hour:minute:second).
This choice is on the full Setup utility menu only.
• Start Options
Select this choice to view the startup sequence or select an option to try and boot from immediately.
Note: Any option that is selected, will happen immediately.
• Boot Manager
Select this choice to view, add, delete, or change the device boot order, boot from a file, boot from a
device, or boot the UEFI shell. This choice is on the full Setup utility menu only.
• System Event Logs
Select this choice to enter the System Event Manager, where you can view the POST event log and the
system-event log. You can use the arrow keys to move between pages in the error log. This choice
is only on the full Setup utility menu.
The POST event log contains the most recent error codes and messages that were generated during POST.
140
Lenovo System x3750 M4 Installation and Service Guide