Lenovo System x3750 M4 Installation And Service Manual page 617

Hide thumbs Also See for System x3750 M4:

Table of Contents

Alert Category

Critical - Temperature

SNMP Trap ID

CIM Information

Prefix: PLAT ID: 0524

User Response

Complete the following steps:

1. Check the IMM event log for any fan or cooling related issues.

2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers

are in place and correctly installed.

3. Ensure system cover is latched properly.

4. Make sure that the room temperature is within operating specifications.

5. Make sure that the microprocessor 4 heat sink is securely installed.

6. (Trained service technician only) Make sure that the microprocessor 4 heat sink is installed

correctly and the thermal material is correctly applied.

7. (Trained service technician only) Replace microprocessor 4.

• 80070301-0b09xxxx : IMM has detected that the temperature for ML2 card has transitioned to a

non recoverable state.

IMM has detected that the temperature for ML2 Card has transitioned to a non recoverable state.

Automatically notify support