Software Installation - Agilent Technologies U2300A Series User Manual

Software Installation

N O T E
If you would like to use the U2300A series USB DAQ devices with
the Agilent Measurement Manager application software, follow the
step- by- step instructions as shown in the following flowchart.
•
Agilent VEE, LabVIEW, MATLAB or Microsoft Visual Studio), you can skip
steps D and F in the following flowchart.
You may be required to install the IVI-COM driver before using the U2300A
•
series with other ADEs.
D. Install the Agilent Measurement Manager
F. Launch Your Agilent Measurement Manager
F. Launch Your Agilent Measurement Manager
A. Check Your System Requirements
A. Check Your System Requirements
B. Install the Agilent IO Libraries Suite
B. Install the Agilent IO Libraries Suite
C. Install the Hardware Driver
C. Install the Hardware Driver
D. Install the Agilent Measurement Manager
E. Connect Your Device to the PC
E. Connect Your Device to the PC
7