Table of Contents
Advertisement
Appendix C - Software Upgrade
C.3
Completing the Software Upgrade
(Switching Versions)
After verifying suc
main version in each one of the upgraded system elements:
SU(s): Select th
V
ersions Control > Set as Main, and enter the name of the new SU SW file. The
unit will reset autom
Repeat the pro
AU(s): Select the AU that should be upgraded. Select Unit Control > SW
Versio
unit w
versio
NPU/µ
The sy
from t
To switch versions, select Unit Control > SW Versions Control > Set as Main.
228
cessful upload of all software files, set the new version as the
e SU that should be upgraded. Select Unit Control > SW
atically and will use the ne
cess for all SUs that should be u
ns Control > Set as Main, and enter the name of the new AU
ill reset automatically. After power-up, the unit will use the new
n. Repeat the process for all AUs that should be upgraded.
BST: Select Unit Control > SW Versions Control > Run from Shad
stem will reset automatically. After power-up, the NPU/µBST
he new versi
on, that at this stage is still marked as the Shadow Version.
w version after power-up.
pgraded.
SW file. The
will run
BreezeMAX System Manual
ow.
Advertisement
Table of Contents
