Table of Contents
Advertisement
B.2
Using the Monitor Program
B.2.1
Accessing the Monitor Program
To access the Monitor program:
The Monito
1
subnet mask 255.255.255.0. The PC used for accessing the Monitor program
should be configur
address to 192.168.254.250, which is the default TFTP Server IP address
(required for download
configuration files.
NOTE
The IP address 192.168.254.251 is used only for the Monitor program. This is not the IP address
used by the unit for other purposes. The IP parameters for management purposes are allocated by
the NPU during the Network Entry process.
Connect the PC to the Ethernet port, using a straight cable.
2
Run the Telnet program connecting to 192.168.254.251. T
3
passwod prompt is displayed. Enter the password and press the Enter key.
NOTE
Follo
wing three consecutive failure
will be blocked for 5 minutes.
The factory default password is "installer".
If yo
u forgot the password, type
Contact Alvarion's Customer Service and provide the challenge string (after user identification) to
receive a temp
pas
sword must be changed during the
administrator should be notified of this new password. Five consecutive errors in entering the
temp
orary password will invalidate
strin
g for a new temporary passwo
The Main menu of the SU Installer Monitor program is displayed, enabling
4
you
to access the req
monitoring options.
B.2.2
Using the Program
Thi
s section describes the Monitor program structure and navigation rules.
Each menu or submenu displays a list of numbered options. To access an
option, enter the number of the required option at the > prompt and pre
En
ter key.
The header of each displayed item includes the unit identification (MAC
Add
ress), the running SW version and the name of
BreezeMAX System Manual
r program uses the fixed IP address 192.168.254.251. with the
ed accordingly. It is recommended to set the PC's IP
ing SW versions and for downloading/uploading
s to enter the correct password, access to the Monitor program
"help" to receive a challenge string consisting of 24 characters.
orary password. You can us
session to a different "permanent" password. The
it. In this case, repeat this procedure to receive a new challenge
rd.
uired parameters configuration and performance
e this password only once to enter the program. The
the current item.
Using the Monitor Program
he Enter the
ss the
197
Advertisement
Table of Contents
