Table of Contents
Advertisement
Enter the name of the configuration file (as will be called in the TFTP server)
2
as the Configuration File Upload Name.
Select Perform Configuration Upload and confirm the dupload request. Wait
3
to receive a success/failure message.
B.4.6
Et
hernet Port Operation Mode
The Ethernet Port Control parameter enables viewing and defining the operation
mode of the Ethernet port
The available options are:
Show Ethernet Mode
Auto Negotiation
100 Mbps, Full-Duplex
100 Mbps, Half-Duplex
10 Mbps, Full
10 Mbps, Half-Duplex
The default is Auto-Negotiation.
Upon selecting the Show Ethernet Mode option, the configured and actual values
are displayed:
Current Eth Mode: the actual operation mode of the Ethernet port.
Configured Eth Mode: the configured operation mode of the Ethernet port.
Detected Eth Mode: the actual speed and duplex parameters of the Ethernet
port.
BreezeMAX System Manual
-Duplex
Unit Control Menu
209
Advertisement
Table of Contents
