Alvarion BreezeMAX 3500 System Manual page 185

Hide thumbs Also See for BreezeMAX 3500:
Table of Contents

Advertisement

NOTE
DSCP based Priority Classifiers are applicable only to IP or ARP traffic. It is not applicable to
PPPoE and other Ethernet type traffic.
If a Priority Classifier is not applicable for a certain traffic (e.g. DSCP based profile with PPPoE
traffic or 802.1p based profile with traffic that do not use VLAN tags), no prioritization scheme will
be in effect and quality of service will be determined by the first QoS Profile in the applicable lists.
Th Priority Classifier menu enables defining new Priority Classifiers, viewing or
e
edi
ting details of previously defined Priority Classifiers and removing Priority
Classifie
Th configurable Priority Classifier's parameters are:
e
4.10.3.6.1 Pr
iority Classifier Name
A Priority Classifier Name consists of up to 32 printable characters.
4.10.3.6.2 Pr
iority Type
Th prioritization mechanism used by the Priority Classifier.
e
The
available options are:
1 – DS
CP
2 – 802.1p
4.10.3.6.3
Uplink Upper Priority Limits
Th Uplink Upper Priority Limits parameter enables to define up to four ranges,
e
whe
re each range may be assign
communication. The list includes up to 4 numbers separated by commas, w
each number must be higher than its predecessor and the last number must be
the highest availabl
Examples for acceptable lists:
DSCP Priority: [10,30,50,63]; [21,42,63]; [20,63]; [63].
802.1p Priority: [2,4,6,7]; [1,5,7]; [6,7]; [7].
A ranges list of 21,42,63 means that packets with a priority from 0 to 21 wil
transmitted using the first QoS Profile defined in the Uplink QoS Profiles list (s
below), packets with a pr
QoS Profile defined in the Uplink QoS Profiles list and packets with a priority
higher than 42 (43-63) will be transmitted using the third Uplink QoS Profile.
A ranges list that includes a single entry (63 for DSCP and 7 for 802.1p) means
that priority based classification is not u
BreezeMAX System Manual
rs from the database.
e for the applicable priority type (7 for 802.1p, 63 for DSCP).
iority from 22 to 42 will be transmitted using the second
ed a different QoS Profile for uplink
sed.
Services Menu
here
l be
ee
165

Advertisement

Table of Contents
loading

Table of Contents