Table of Contents
Advertisement
B.9
Multirate and ATPC Parameters Menu
In regular operation the transmitted signal is controlled by the ATPC m
The ATPC mechanism in the SU is controlled by the Base Station.
The Multirate and ATPC Parameters menu enable temporary control o
transmitted by the SU. It is intended for test purposes only, when it m
necessary to force the unit to transmit at a certain fixed power level. It
enables a continuous transmission of an OFDM signal at a configurable power
level.
These settings will not be saved and will automatically return to original values
as received from the Base Station when the units reset
program (or upon termination).
The Multirate and ATPC Parameters menu includes the following options:
Show
Enable ATPC
Disable ATPC and Set T
Transmit Continuous OFDM
B.9.1
Show
Select this option to view the current Multirate and ATPC parameters:
Last Tx Rate
Optimal Rx Rate: The current optimal rate for received signals.
ATPC: The current status current status (Enabled/Disabled) of the ATPC
mechanism
Tx Power: The current Tx power.
B.9.2
Enable ATPC
Select this option to enable the ATPC mechanism after disabling it temporarily for
testing purposes.
BreezeMAX System Manual
x Power
Multirate and ATPC Parameters Menu
echanism.
f the signal
ay be
also
s or upon exiting the
221
Advertisement
Table of Contents
