Table of Contents
Advertisement
Use a crimp tool for RJ-45 connectors to prepare the wi
appropriate pins and use the crimp tool to crimp the co
the following:
Remove as small a length as possible of the external jacket. Verify that the
1
external jacket is well inside th
Take back the shield drain wire before inserting the cable into the RJ-45
2
connector, to ensure a good connection with the connector's shield after
crimping.
BreezeMAX System Manual
The SU Installer Monitor Program
res, insert them into the
nnector. Make sure to do
e service box to ensure good sealing.
193
Advertisement
Table of Contents
