Table of Contents
Advertisement
4.10.3.4.8
Maximum Number of Voice Calls (L2 and Voice Service
Ty
pe)
The
Maximum Number of Voice Calls parameter sets the upper limit on the
nu
mber of simultaneous VoIP calls that can be supported by the Service using
the
Service Profile. This parameter is applicable only for L2 and Voice Service
Prof
iles.
The available range is from 0 to 10 calls.
NOTE
To properly support Call Waiting, the Maximum Number of Voice Calls should be configured to a
value that is twice the number of actual voice sessions that can be supported simultaneously.
4.10.3.5
Forwarding
The
Forwarding Rule defines the features that
data. Data in L2 and Voice services may be switched only between the Services
that share the same Forwarding Rule. Data in PPPoE service can pass only
between the subscriber and an Access Concentrator behind the Base Station.
The Forwarding Rule menu enables defining new Forwarding Rules, viewing or
editing details of previously defined Forwarding Rules and removing Forwarding
Rules from the database.
The configurable Forwarding Rul
4.10.3.5.1
Forwarding Rule Name
A Forwarding Ru
4.10.3.5.2
Service Type
The Service Type for which the Forwarding Rule is defined. The Service Type
parameter is configurable on
changeable.
The currently available S
1 – L2
2 – PPPoE
3 - Voice
For more details refer to
4.10.3.5.3 Unicast Relaying (L2 and Voice Service Type)
The Unicast Relaying parameter determines whether the AU performs unicast
relaying. W
originating fro
BreezeMAX System Manual
Rule
e's parameters are:
le Name consists of up to 32 printable characters.
ly when defining a new Service Profile (Add). It is not
ervice Type options are:
Service Types
hen the Unicast Relaying parameter is enabled, unicast packets
m devices on the wireless link can be transmitted back to the
affect forwarding and switching of
on page 151.
Services Menu
163
Advertisement
Table of Contents
