Table of Contents
Advertisement
Chapter 2 - Installation
Press the handles down (the upper handle)/up (the lower handle
4
module is unlocked, firmly hold the handles and take the module
chassis.
To eject a PIU or PSU module:
Release the screw at the top of the front panel.
1
Press the handle's
2
Press the handle up until the module is unlocked, firmly hold the handle and
3
take the module out of th
CAUTION
Disconnect power from the PIU module before inserting/ejecting it to/from the chassis. Before
disconnecting the power cable from the PIU, the power source must be disconnected to avoid
irreversi
ble damage d
56
red button until the handle is unlocked.
e chassis.
ue to potentially excessive high transient current.
) until the
out of the
BreezeMAX System Manual
Advertisement
Table of Contents
