Table of Contents
Advertisement
B.4.5.2.2
TFTP Server IP Address
Select this option to change the IP address of the TFTP server.
The default TFTP Se
NOTE
1. When the SU is synchronized with a base station, it receives the TFTP Server IP Address from
the base station during the network entry process. This address is 1.7.1.1 for a Base Station (NPU)
and 1.1.1.1 for a Micro Base Station. This will be the TFTP Server IP Address after each reset, as
long as the SU is associated with a base station.
2. The same TFTP Server IP Address parameter is used in the SW Download, Configuration File
Download and Configuration File Upload processes.
B.4.5.2.3 Configuration File Download Name
Select this option to enter the name in the TFTP server of the required
configuration file. A Configuration File Download Name consists of up to 50
characters.
The default Configuration File Download Name is SU_DOWNLOA
B.4.5.2.4 Perform Configuration Download
Select this option to
unintentional actions you will be prompted to confirm the request.
To perform configuration file download:
The required configuration file should be available in the TFTP Server
1
directory in a PC connected to the unit.
Typically it is recommended to configure the IP address of the PC to
2
192.168.154.250, which is the default TFTP Server IP address of the unit. If a
different IP address is configured in the PC with the TFTP server, configure
the TFTP Server IP address to the same address.
Enter the name of the configuration file (as called in the TFTP server) as the
3
Configuration File Download Name.
Select Perform Configuration Download and confirm the download request.
4
Wait to receive a success/failure message.
Following a successful download, reset the unit to apply the new
5
configuration.
B.4.5.3
Configuration File Upload Control
The Configuration File Upload Control submenu enables to define parameters
related to uploading the configuration of the SU to a file in the TFTP server
directory, and to initiate the upload operation. It includes the following options:
Show
BreezeMAX System Manual
rver IP address is 192.168.254.250.
execute the configuration file download operation. To avoid
Unit Control Menu
D_CFG.
207
Advertisement
Table of Contents
