Table of Contents
Advertisement
Chapter 4 - Operation and Administration
AVG-1D2V: A stand-alone (external) Voice Gateway, supporting 1 data port
and 2 POTS ports, with advanced routing functionality.
4.9.6.3.6
Ethernet Port
The Ethernet Port menu enables configuration of the Ethernet port operation
mode (speed and duplex).
4.9.6.3.6.1 Show
The Show option enables viewing the configured and actual operation modes:
Current Mode: The current
C
onfigured Mode: The operation mode to be used by the SU
re
set.
Detected Mode: The actual operation mode. When the Current Mode is Auto
Neg
otiation, the Detected Mode displays actual speed/duplex parameters
used by the SU as a result of the auto negotiation process.
4.9.6.3.6.2
Update
Select the Update option to configure the
parameter. The available options are 10 Half, 10 Full, 100 Half, 100 Full and
Auto Negotiation
The default is Auto Negotiation.
4.9.6.3.7 Installer Password
The Installer Pa
configuring a new password. The Installer Password is used for accessing the
SU's Monitor (Installer) program locally, using Telnet via the SU's Ethernet por
The Installer P
sensitive.
The default Installer Password is installer.
4.9.6.3.8 Bridging Paramete
The Bridging Parameters menu enables setting a limit on the maximum number
of Ethernet devices behind the SU and configu
the SU's bridging table. The Bridging parameters are:
4.9.6.3.8.1
Enable/Disable Limi
If the Enable/Disable Limit on Number of Supported Devices parameter is set
Dis
able, the maximum number of supported devices is 512.
The
default is Disa
144
operation mode used by the SU.
.
ssword option enables viewing the current Installer Password and
assword consists of a string of up to 20 printable characters, case
rs
t on Number of Supported Devices
ble.
Ethernet Port Configuration
ring the aging time for devices in
BreezeMAX System Manual
after the next
t.
to
Advertisement
Table of Contents
