Table of Contents
Advertisement
Appendix B - Using the SU Installer Monitor Program
TFTP Server IP Address
Configuration File Upload Name
Perform Configuration Upload
B.4.5.3.1
Show
Select this option to view the current Configuration File Upload parameters:
TFTP
configuration file upload.
Configuration File Upload Name: the name in the TFTP server directory of the
configu
B.4.5.3.2
TFTP Server
Select this o
The default TFTP Server IP address is 192.168.254.250.
NOTE
1. When the SU is synchronized with a base station, it receives the TFTP Server IP Address from
the base station during the network entry process. This address is 1.7.1.1 for a Base Station (NPU)
and 1.1.1.1 for a Micro Base Station. This will be the TFTP Server IP Address after each reset, as
long as the SU is associated with a base station.
2. The same TFTP Server IP Address parameter is used in the SW Download, Configuration File
Download and Configuration File Upload processes.
B.4.5.3.3
Configuration File Upload Name
Select this option to enter the name in the TFTP server directory
configuration file to be uploaded. A Configuration File Upload Name consists of
up to 50 characters.
The
default Configuration File Upload Name is SU_UPLOAD_CFG.
B.4.5.3.4 Perform Configuration Upload
Select this option to execute the configuration file upload operation. To avoid
un
intentional actions you will be prompted to confirm the request.
To perform configuration file upload:
Typically it is recommended to configure the IP address of the PC to
1
192.168.154.250, which is the
different IP address is configured in the PC with the TFTP server, configure
the TFTP Server IP address to the same address.
208
Server IP address: the IP address of the TFTP server used for
ration file to be uploaded.
IP Address
ption to change the IP address of the TFTP server.
default TFTP Server IP address of the unit. If a
BreezeMAX System Manual
of the
Advertisement
Table of Contents
