Table of Contents
Advertisement
Appendix B - Using the SU Installer Monitor Program
Configuration File Upload Name: the name in the TFTP server of the
configuration file to be uploaded from the unit.
Ethernet Port Operation Mode parameters and status:
Current Eth Mode: the actual operat
Configured Eth Mode: the configured operation mode of the Et
Detected Eth Mode: the actual speed and duplex parameters of the
Ethernet port.
HW Versions:
ODU HW Version: The version of the ODU's digital module
ODU HW Configuration
ODU RF Version: The version of the ODU's radio module
Unit Status: the connectivity status of the unit.
Searching for Base Station
Base Station Found
Not
Not Registered
Registered
B.4.2
Reset Unit
Select this
prompted to confirm the reset request. Changes to most of the configurable
parameters are applied only after reset. Refer to
pag
e 152 for information on which parameters are changeable in run time
which changes are applied only after reset.
B.4.3
Change Password
Sel
ect this option to change the password. You will
password. After pressing enter, you will be prompted to re-enter the new
password.
202
Authorized
option to reset the unit. To avoid unintentional reset, you will be
ion mode of the Ethernet port.
Possible statuses are:
SU's Parameters Summary
be prompted to enter the new
BreezeMAX System Manual
hernet port.
on
and
Advertisement
Table of Contents
