Table of Contents
Advertisement
4.7.3.2.6 Auto Negotiation Option (
The Data port of the µBST
Option enabled or disabled.
The default is Enabled.
When the Auto Nego
the relevant Show menus displays the detected operation mode. When the Auto
Negotiation Option is
Show menus displays the configured operation mode. Upon selection of the
Disable op
4.7.3.2.6.1 Select Link Speed and Duplex
This option is applicable only when the Auto Negotiation Option is disabled. The
available options are 10 Mbps Ha
Duplex and 100 Mbps Full Duplex.
4.7.3.2.7
Data Port Management Traffic Enable/Disable
The Data Port Management Traffic Enable/Disable parameter allows
enabling/disab
NOTE
To prevent the undesired situation where management traffic is unintentionally disabled in both the
MGMT and DATA ports, the Management Port Management Traffic Enable/Disable parameter will
be automatically forced to Enabled upon disabling the Data Port Management Traffic, and vice
versa.
4.7.3.3
Authorized Managers
The
Authorized Managers submenu enables defining the properties of
ma
nagement stations that are allowed to manage the Base Station.
The Authorized Manager submenu includes the following options:
4.7.3.3.1
Show All
Sel
ect this option to view the details of
4.7.3.3.2 Select
This option enables selecting an existing authorized manager for viewing or
updating its properties or for deleting it from the database. The selection is base
on
the authorized manager's IP a
details on the configurable parameters.
BreezeMAX System Manual
can be configured to operate with Auto Negotiation
tiation Option is enabled, the Speed and Duplex parameter in
disabled, the Speed and Duplex parameter in the relevant
tion, the user is prompted to select the speed and duplex:
ling management traffic via the DATA port.
µBST)
lf Duplex, 10 Mbps Full Duplex, 100 Mbps Half
all currently defined authorized managers.
ddress. Refer to the following Add section for
NPU Menu
d
111
Advertisement
Table of Contents
