Table of Contents
Advertisement
Chapter 4 - Operation and Administration
4.1
BreezeMAX System Management
All BreezeMAX system components associated with a modular Base Station are
managed via the Base Station's NPU module. The other system components (AUs
and SUs) ar
is se
nt to the NPU that
also
for a Micro Base sta
via t
he Micro Ba
NOTE
The SU can also be managed directly from its Ethernet port using the Installer Monitor program.
This
option is available
perfo
rmance monitoring
The following management options are available:
SNMP
system customized to support management of BreezeMAX)
Using Telnet to access the embedded Monitor application.
Accessing the embedded Monitor application locally via the MON port.
Two management access methods are available to support management using
SNMP and/or Telnet:
Out-Of-Band (OOB) management via the dedicated MGMT port.
In-Band (IB) management via the DATA port.
Typically, BreezeMAX
SNMP based network management system.
This chapter describes how to manage the system using the Monitor applic
For information on managing the system using AlvariSTAR refer to the Applic
AlvariSTAR documentation.
NOTE
To enable remote management (using SNMP and/or Telnet), the parameters of the applicable port
(MGMT and/or DATA) must first be configured via the MON port. For details on the applicable
parameters refer to
84
e not access
ed directly: each configuration change or status enquiry
communicates with other system components. This is true
tion, where all the associated SUs are managed indirectly
se Station (µBST).
to support the installation process and enable special tests and
at the SU's site.
based management using AlvariSTAR (or another n
systems will be managed using AlvariSTAR or another
Configuration (NPU)
on page 107.
etwork management
ation.
able
BreezeMAX System Manual
Advertisement
Table of Contents
