Table of Contents
Advertisement
Appendix B - Using the SU Installer Monitor Program
The first selectable item in each menu is the Show option, enabling to vie
w
the
current configuration of the applicable paramet
ers. For some menus some
additional status information is displayed.
At any point in the program, you can use the Esc key to return to the previous
menu (one level up) without applying any change.
Configurable parameter's menu displays the current value/status of the
parameter and provides instructions related to configuration changes. These
instructions may include the permitted value range for the parameter, t
he
per
mitted format o
r the selectable options.
Each change in
a parameter's configuration must be confirmed using the
Enter key. If the new value/option is a valid one, the program will return to
the previous menu. Entry of a wrong value will be indicated by
an appropriate
error message, and the configuration change text will be displayed again.
Changes to certain parameters are applied only after reset. For these
parameters, the applicable Show menus display both Current
and Configured
values.
If the Monitor program is not used for 10 minutes, the session will be
terminated automatically.
Select the Exit option in
the Main menu to exit the program and terminate the
session.
BreezeMAX System Manual
198
Advertisement
Table of Contents
