Table of Contents
Advertisement
4.7.3.1.1 Management Port IP Address
The IP address of the MGMT port.
The default is 10.0.0.1.
4.7.3.1.2
Management Port Subnet Mask
The Subnet mask of the MGMT p
The d
efault is 255.255.255.
4.7.3.1.3 Management Port Gateway
The Ga
teway IP address of the MGMT po
The
default is 0.0.0.0.
4.7.3.1.4 Management Port Dest Subnet
Su
bnet Mask
The
Destination Subnet parameters d
manage the device when connected via a router to the MGMT port. All
ma
nagement frames destined for addr
via the MGMT port. All management frames that are not destined for these
add
resses, or to addresses belonging t
routed via the DATA port.
The d
efault is 0.0.0.0. for both param
NOTE
The Managem
toge
ther. Exiting the configuration process (e.g
the first one or two parameters in this group will cancel the changes made.
4.7.3.1.5 Auto Negotiation Option (µBST)
Management port of the µBST c
The
Negotiation Option enabled or disabled.
The default is Enabled.
Wh
en the Auto Negotiation Option is ena
the relevant Show menus displays the detected operation mode. When the Auto
Neg
otiation Option is disabled, the Spe
Show menus displays the configured operation mode. Upon selection of the
Dis
able option, the user is prompted
4.7.3.1.5.1 Select Link Speed and Duplex
This option is applicabl
availa
ble options are 10 Mbps Half D
Duplex an
BreezeMAX System Manual
0.
ent Port Gateway, Destination S
e only when th
d 100 Mbps Full Duplex.
ort.
rt.
Management Port Dest
and
efine the IP subnet of stations that can
esses belonging to this group will be routed
o the MGMT port local subnet, will be
eters.
ubnet and Destination Subnet Mask are grouped
. by pressing the Esc button) after configuring just
an be configured to operate with Auto
bled, the Speed and Duplex parameter in
ed and Duplex parameter in the relevant
to select the speed and duplex:
e Auto Negotiation Option is disabled. The
uplex, 10 Mbps Full Duplex, 100 Mbps Half
NPU Menu
109
Advertisement
Table of Contents
