Table of Contents
Advertisement
Enable/Disable Limit on Number of Supported Devices
Maximum Number of Supported Devices
Bridge Agin
4.9.6.2
Unit Control
The SU Unit Control menu enables defining the SU's status, resetting the SU
managing the SW versions of the unit.
The Unit Control menu includes the following opt
Status
R
eset
Set Factory Defaults
SW Version Control
4.9.6.2.1
SU Status
The SU Status parameter enables defining the sta
the services it can receive.
The available options are:
1 – Permanent
2 – Temporary
NOTE
An SU that is defined as Temporary will be deleted from the database when it is disconnected.
4.9.6.2.2 Reset Unit
Select this option to reset the unit. To avoid unintentional reset, you will be
prompted to confirm the reset request. Changes to some of the configurable
parameters are applied only after reset. Refer to
Parameters Summary
changeable in run time and which changes are applied only after reset.
4.9.6.2.3 Set Factory Defaults
Select this option to set the SU parameters to their factory default values. Refer to
SU Parameters Summary
BreezeMAX System Manual
g Time (minutes)
on page 177 for information on which parameters are
on page 152 for information on the factory default
ions:
tus of the SU, which determines
NPU/Micro Base Station
SU Menu
and
137
Advertisement
Table of Contents
