Table of Contents
Advertisement
Chapter 4 - Operation and Administration
Shadow SW Version
Running From: The currently running version (Main or Shadow)
Boot SW Version
4.7.2
Unit Control
The Unit Control menu of the NPU/ µBST enables changing the acc
and the Monitor Inactivity Timeout, resetting the NPU/ µBST, setting factory
defaults, managing the SW versions of the module and creating backup files.
The
Unit Control menu in
Change Password
Reset
Set Factory Defaults
SW Versions Control
Create Backup
Monitor Inactivity Timeout
4.7.2.1
Change Passwor
Select this opt
password. After pressing enter, you will be prompted to re-enter the new
password.
NOTE
Notify the system administrator of the new password!
Valid passwords: Up to 16 printable characters, case sensitive.
The default password is admin.
4.7.2.2
Reset Unit
Select this option to reset the NPU/ µBST. To avoid unintentional reset, you will
be prompted to confirm the reset request. Changes to some of the configurable
parameters are applied only after reset. Refer to
Parameters Summary
changeable in run time and which changes are applied only after reset.
104
cludes the following options:
d
ion to change the password. You will be prompted to enter the new
on page 177 for information on which parameters are
ess password
NPU/Micro Base Station
BreezeMAX System Manual
Advertisement
Table of Contents
