Table of Contents
Advertisement
Completing the Software Upgrade
(Switching Versions)
After verifying successful upload of all software files, set the new version
as the main version in each one of the upgraded system elements:
SU(s): Select the SU that should be upgraded. Select Unit Control >
SW Versions Control > Set as Main, and enter the name of the new
SU SW file. The unit will reset automatically and will use the new
version after power-up. Repeat the process for all SUs that should
be upgraded.
AU(s): Select the AU that should be upgraded. Select Unit Control >
SW Versions Control > Set as Main, and enter the name of the new
AU SW file. The unit will reset automatically. After power-up, the
unit will use the new version. Repeat the process for all AUs that
should be upgraded.
NPU/µBST: Select Unit Control > SW Versions Control > Run from
Shadow. The system will reset automatically. After power-up, the
NPU/µBST will run from the new version, that at this stage is still
marked as the Shadow Version. To switch versions, select Unit
Control > SW Versions Control > Set as Main.
C-4
BreezeMAX System Manual
Advertisement
Table of Contents
