Table of Contents
Advertisement
Appendix B - Using the SU Installer Monitor Program
B.4.4.1
Show
Select this option to view the current
as well as the TFTP parameters:
SW Versions:
Main SW File Name
Main SW Version
Shadow SW File Name
Shadow SW Version
Running from: indicates whether the unit is running now the Main or the
Shadow version.
Download/Upload Parameters:
TFTP Server IP address: the IP address of the TFTP server used for SW
version download and for Configuration File Download/Upload.
SW File Name: the name in the TFTP server of the SW version to be
downloaded to the unit.
B.4.4.2
Reset and Run from Shadow
Select this option to reset the unit and run the Shadow version after power up. To
avoid unintentional actions you will be prompted to confirm the request
B.4.4.3
Set Running Ver
When the unit is running the Shadow version (after selecting Reset a
Shadow), it will boot from the Main versio
if you want to swap versions so that the r
version and will be the version to be used after reset. To avoid unintentional
actions you will be prompted to confirm the request.
B.4. .4
4
SW Download Parameters
Th s submenu enables viewing or defining the parameters to be used for
i
dow
nloading a new SW version from a TFTP server. It includes the following
opt
ions:
Show
204
available versions and the running version
sion as Main
n after the next reset. Select this option
unning version will become the Main
.
nd Run from
BreezeMAX System Manual
Advertisement
Table of Contents
