Table of Contents
Advertisement
Profiles and Services: All the profiles and configurations associated with
service (General Service parameters, Subscribers, Services, Service Profiles
Forwarding Rules, Priority Classifiers, QoS Profiles)
Upon selecting the backu
request. After confirmation, a message is displayed indicating that the backup file
creation is in process. Upon successful completion of the process, a completion
message will be displayed.
If a backup file of the same type already exists in the NPU/ µBST, you will be
asked whether to overwrite the existing file. If there was an error in th
creating a backup file, an error me
To upload/download the Backup File:
After the backup file has been created, it can be uploaded using a DOS based
TFTP Client application to a target directory. To upload the file, use the
command:
tftp-i <Port IP address> get <file name> <destination address>.
The default file name is:
Full: backup.res.
Profiles: profiles.res
Profiles and Services: profiles_srvcs.res
The fil
e is encrypted and cannot be edited. However, it can be downloaded to
ther NPU(s)/ µBSTs using a DOS based TFTP Client application with the
o
com
mand: tftp-i <Port IP address> put <file name>.
The target NPU/ µBST will decrypt
files and databases and will store them, replacing existing files/databa
NPU/ µBST should be reset to apply the downloaded configuration.
NOTE
To avoid loss of connectivity behind a router, the basic IP parameters of the MGMT and DATA
ports (IP Address, Subnet Mask, Default Gateway) are not changed when loading a Full backup file
to the NPU/ µBST. The values of these parameters configured in the target NPU/ µBST before the
loading process, are maintained.
4.7.2.6
Monitor Inactivity Timeout
The Monitor Inactivity Timeout parameter determines the amount of inactive time
following which the unit automatically exits the Monitor program.
The time out duration can range from 1 to
BreezeMAX System Manual
p type option, you will be requested to confirm the
ssage will be displayed, specifying the reason.
the backup file, extract all the configuration
60 minutes.
NPU Menu
,
e process of
ses. The
107
Advertisement
Table of Contents
