Table of Contents
Advertisement
Chapter 4 - Operation
4.9
ATPC Parameters
In regular operation, the level of the signal transmitted by the CPE is controlled by
the Adaptive Transmission Power Control (ATPC) mechanism of the serving BS.
The ATPC page enable temporary control of the signal transmitted by the CPE. It
is intended for test purposes only.
These settings will not be saved and will automatically return to original values as
received from the BS when the unit resets or upon closing the web interface.
The ATPC menu includes the following sub-menus:
Show
ATPC
4.9.1
Show
Select this option to view the current Multirate and ATPC parameters:
Last Tx Rate: the last detected transmission rate
Optimal Rx Rate: the transmission rate best suited to the connection
ATPC: The current status (Enabled/Disabled) of the ATPC mechanism
Tx Power: the transmission power level
Current Country Code Data: the country code that is currently used.
BreezeMAX PRO 5000 CPE
Figure 4-14: ATPC Show Page
72
ATPC Parameters
Product Manual
- Quick Links:
- Figure 1-1: Cpe Outdoor Units
Hide quick links:
Advertisement
Table of Contents
